Videovox Pro LNS series Bedienungsanleitung PDF herunterladen (Seite 46)

Boot up the DVR, input user name and password.

In the main menu, click setting, and then click Pan/Tilt Control button. The

interface is shown as in

409HFigure 4-23. Here you can set the following items:

z Channel: select the current camera channel.

z Protocol: select corresponding PTZ protocol(such as DH-SD1)

z Address: default address is 1.

z Baud rate: select corresponding baud rate. Default value is 9600.

z Data bits: select corresponding data bits. Default value is 8.

z Stop bits: select corresponding stop bits. Default value is 1.

z Parity: there are three options: odd/even/none. Default setup is none.

Figure 4-23

After all the setting please click save button.

In one window display mode, right click mouse (click “Fn” Button in the front panel

or click “Fn” key in the remote control). The interface is shown as in

410HFigure 4-24.

Figure 4-24

Click Pan/Tilt/Zoom, the interface is shown as below. See

411HFigure 4-25.

Here you can set the following items:

z Step: value ranges fro 1 to 8.

z Zoom

z Focus

z Iris

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 106 107

Keine Kommentare

Videovox Pro LNS series Bedienungsanleitung Seite 46